Free Maze by NOISS COKO For Ableton Live

Maze is a simple Max for Live looping device, inspired by the Time Lag Accumulator system developed by electronic music composer Terry Riley.

Known as one of the earliest live recording technics, it is constructed around a short tape loop and two reel to reel tape machines.

The first records the sound while the other plays it back shortly after, thus creating an endless feedback loop.

The same approach was also adopted by many other musicians throughout the years, with Brian Eno and Robert Fripp probably being one of the most popular examples of all.

Pricing and Availability

Maze is available for free now.

Advertisement

Repeat Pro and Sempler Pro v1.2 Updates

Repeat Pro & Sempler PRO by Noiss Coko have been both updated to Version 1.2. For if your product download includes an Ableton Live Pack – To install simply remove the current installation from the packs section within Live and double click the provided .alp file.

New in Version v1.2 of Repeat Pro and Sempler Pro

• Fixed Mute and Skip values not being saved with Live/Max latest versions. 

Repeat Pro Version v1.2

• Fixed Pong mode not playing immediately after Live session is reopen. 
• Fixed Change slider not showing when Live session is reopen. 
• Fixed Random (Repeat button) function sometimes being stuck with Notevalues when using Push 2 as control surface.  

Repeat is a Max for Live MIDI effect, designed to easily program rhythmic and melodic patterns step by step, then played by synthesizers, samplers and other instruments, both inside and outside Live. The whole device is exclusively driven by a sixteen step sequencer, which among other parameters allows to set a different note, velocity, length, octave, control and delay amount for every single step.

Sempler Pro Version v1.2

• Fixed interface problems when using Push 2 as a control surface and more than one copy of Sempler.  
• Delete button is now enabled when using Push 2 as a control surface. 
• Changed FM and Delay Arrows design.

Sempler PRO is a polyphonic sample playback instrument, designed to create complex patterns by performing simple actions. The whole device is exclusively driven by its integrated sequencer, which among other parameters allows to set a different starting point, size, pitch, level and delay amount for every single step. Each configuration will then produce a continuous stream of fragments, played one after the other to generate a unique arrangement that results from the combination of these little pieces and bits of audio.

Pricing and Availability

Version v1.2 of Repeat Pro and Sempler Pro are available in your user account.

NOISS COKO – Make NOISS Bundle

The Make NOISS Bundle is a collection of all of NOISS COKO’s MaxforLive devices released to date on IsotonikStudios. Isotonik Studios bundled them all together and taken 25% off the price of buying each pack individually!

The Make NOISS Bundle collects together all of NOISS COKO’s MaxforLIve Packs released to date in one bargain collection!

• Repeat PRO
• Sempler PRO
• Modulation Pack
• Control Pack

REPEAT PRO

Repeat Pro is a Max for Live MIDI effect, designed to easily program rhythmic and melodic patterns step by step, then played by synthesizers, samplers and other instruments, both inside and outside Live.

The follow up to the hugely successful Repeat device, Repeat PRO has been rebuilt from the ground up with a swathe of new features.

The whole device is exclusively driven by a sixteen step sequencer, which among other parameters allows to set a different note, velocity, length, octave, control and delay amount for every single step. Part of Repeat Pro’s magic resides on the uncertainty factor that surrounds its behavior and defines the state of its most important parameters.  

Main features and functions

• Sixteen step MIDI sequencer.
• Note, Velocity, Length, Octave, Control and Delay values for each step.
• Complete Push integration (only for Push 2).
• Store and recall up to 64 presets.  
• Control Change messages for external instrument modulation.
• Program Change messages for external instrument preset control. 
• Map function for Ableton Live parameter modulation. 
• Mute and Skip buttons.  
• Random function applied over all the individual step parameters. 
• Random window allows to constantly randomise most importan parameters. 
• Five sequence Playback modes: Right, Left, Pong, Other and Any. 
• Three Rate modes: Sync, Free and Track.

SEMPLER PRO

Sempler PRO is a polyphonic sample playback instrument, designed to create complex patterns by performing simple actions. The whole device is exclusively driven by its integrated sequencer, which among other parameters allows to set a different starting point, size, pitch, level and delay amount for every single step. Each configuration will then produce a continuous stream of fragments, played one after the other to generate a unique arrangement that results from the combination of these little pieces and bits of audio.

Part of Sempler’s magic resides on the uncertainty factor that surrounds its behavior and defines the state of its most important parameters. These random functions make it very easy to produce a whole blast of ideas with only the need of a few simple operations.

Advertisement

An extra set of parameters reflect other global aspects of the instrument and help to shape each pattern even further. These control the sequence length, speed and direction, the envelopes that affect every fragment and voice amplitude, and a group of functions dedicated to the Frequency Modulation, Echo and Filter sections.

MAIN FEATURES AND FUNCTIONS

• Sixteen step sequencer.
• Fragment starting Point, Size, Pitch, Level and Delay values for each step.
• Mute and Skip buttons.
• Random function applied over all the individual step parameters.
• Five sequence Playback modes: Right, Left, Pong, Other and Any.
• Three Rate modes: Sync, Free and Track.
• Chance parameter randomly avoids steps from being played.
• Reset sequence button.
• Polyphony (one voice for each step).
• Window with Peak and Curve parameters.
• Fragments played back in a loop or as one-shot.
• Complete Push integration (only for Push 2).
• Store and recall up to sixty-four presets.
• Crop function for sample editing.
• Amp ADSR Envelope.
• Two unit styles for the sample Frequency Modulation: Note and Hertz.
• Three unit styles for the Echo effect: Note, Sync and Time.
• Lowpass and Highpass filter.
• Random pan.

CONTROL PACK 

The Control Pack is a collection of three MaxforLive Devices designed by NOISS COKO, developer of the best selling Modulation Pack.

Consisting of three MaxforLive Devices, CC Manager, CC Random and Random (The Audio Device Version of CC Random) this pack is designed to bring new level of control and randomisation over External Instruments and Ableton Live Parameters.

CC MANAGER

CC Manager is a helpful MIDI effect, capable of sending up to eighteen MIDI Control Change messages, mainly used as modulation source for external devices such as synthesizers, drum machines, samplers, and any other instrument that enables remote control through Control Change, Program Change or Pitch Bend messages.

Equally useful for both live and studio performance, this device offers an alternative interface for situations where multiple parameters from one or more instruments require simultaneous modulation; when these changes must be extremely precise; or if they are just too complex to be played by hand. For all these scenarios CC Manager presents a different solution, allowing the automation of each parameter using clips inside Live.

Besides the main uses described above, CC Manager works also as a bridge between Live and other programs, since MIDI Control Change messages could be sent outside Live in order to control another audio or video software. An essential part of the Control Pack!

Advertisement

CC RANDOM

CC Random is a simple but versatile MIDI effect that offers a new and different approach to randomness. It generates patterns from a limited group of values, used to produce real time modulations over external devices or any parameter inside Live. From a maximum of eight possible values to choose from, CC Random creates aleatory combinations depending on a set of parameters that add more or less variations to the sequence.

Do you know what a MIDI Control Change message is? This specific type of message is used by CC Random to remotely control parameters from other instruments and effects. Most of the time this is referred to external devices, but in some cases it could be applied over parameters from instruments inside Live. For every case it’s recommended to read the user manual from the specific device you are trying to control, in order to know what Control Change number is assigned to each single parameter.

RANDOM

The final device in the Control Pack is Random (the audio effect version of CC Random), a simple but versatile device that offers a new and different approach to randomness. It generates patterns from a limited group of values, used to produce real time modulations over any parameter inside Live. From a maximum of eight possible values to choose from, Random creates aleatory combinations depending on a set of parameters that add more or less variations to the sequence

MODULATION PACK

FM DELAY

FM Delay is a stereo delay effect that offers individual time control for each channel, also including two oscillators as modulation source for both left and right values. Time and rate are expressed using different unit styles, such as musical notes, note durations (sync) or milliseconds/Hz.

This device covers a wide range of creative needs, besides being a classic delay effect, working as a completely versatile tool that could be applied to all kind of instruments and sounds. Using low modulation frequencies, it’s easy to produce clear tones that result in deeper and intense bass sounds. Higher values will add harmonic richness and overtones to the signal, similar to an overdrive or even a bitcrusher effect.

Advertisement

AM MODULE

AM Module is a versatile and useful device that can be used to create auto panning, tremolo or amplitude modulation effects. It offers four different modulation waveforms and several ways to determine its frequency, covering a wide range that extends from 0.01 Hz to 12.500 Hz.

Medium-high rate values will add overtones and harmonic richness to the signal, creating a classic AM effect that could be applied to percussions, synths, or any desired instrument.

While working on sync mode, rate values will be synchronized with Live’s global tempo, allowing to generate rhythmic modulation patterns from pad or string sounds. A chain of two, three or more modules with different configurations, could be used to create polyrhythmic patterns and more complex results.

AM CHAIN

Advertisement

AM Chain is an audio effect that uses four modulation layers, where amplitude modulation frequencies are only defined using musical notes. For instance, if the selected note is A3, its frequency will be equal to 440 Hz.

Each layer has its own level, amount and rate configuration. Their individual outputs can also be routed to the next layer before going directly to the main output.

DELAY CHAIN

Delay Chain is an audio effect that uses four delay layers, where time values are only defined using musical notes. For instance, if the selected note is A3/440 Hz, time will be equal to 2.27 ms, which corresponds to its period.

Add notes and chords to percussive sounds or compose complex patterns by setting a group of simple automations.

Advertisement

Each layer has its own level, feedback and time configuration. Their individual outputs can also be routed to the next layer before going directly to the main output.

About Noiss Coko

Formally set up in 2016 and currently based in Barcelona, NOISS COKO is a flourishing brand of music production software, mostly dedicated to the development and design of fine Max for Live devices for Ableton Live users. With a strong emphasis on the integration of an intuitive and clear user interface, the main goal behind its products has always been the introduction of instruments and tools that would enhance the experience of making music and working with sound, extending this beyond the given possibilities of Ableton Live.  Shortly after its first release came out, the project joined in as an active part of our collective and has published various products in collaboration with us ever since. However, early ideas and prototypes started off many years before that and were followed by a long process of research and experimentation around the field of electronic music production. All this experience accumulated throughout that time, ultimately gave birth to the first group of devices that later became part of both the Modulation Pack and the Control Pack. Besides all the products that are now available exclusively within our web store, NOISS COKO continuous to work on forthcoming projects and new devices to be released in the near future.

Pricing and Availability

The Make NOISS Bundle is a collection of all of NOISS COKO’s MaxforLive devices released to date on IsotonikStudios.com.

Advertisement