Limiter
Contour 1 by Joranalogue Audio Design – a SLEW LIMITER & FUNCTION GENERATOR
Contour 1 a Slew Limiter & Function Generator
Joranalogue Audio Design launched Contour 1. Contour 1 brings a fresh approach to this classic circuit. It delivers much-improved performance and control by incorporating modern design techniques. At its most basic, a slew limiter slows down the rate of voltage change in a signal. On Contour 1, the rising and falling rates can be individually set using sliders and CV modulation.
Contour 1 Features
- Analog voltage controlled bidirectional slew limiter.
- Precision circuitry to slew any signal, including pitch CV, accurately.
- Separate rise/fall slope bending with voltage control and compensation for minimal effect on slew time.
- Real-time visual feedback through LEDs on slew time sliders.
- Dedicated gate input in addition to the analog slew input: easily create +10 V attack-release (AR) envelopes, regardless of the gate amplitude.
- Trigger input and push-button: reset the slew core and trigger a one-shot attack-decay (AD) envelope through a single trigger signal.
- Voltage hold gate input ‘freezes’ the slew core. Pause envelopes and LFO modulations, or create pulse-width-sensitive sync sounds at audio rates.
- Impedance-compensated regular and inverted analog outputs.
- Rise and fall status gate outputs.
- Loop switch for variable waveshape temperature-stable VC(LF)O operation. Gate input functions as an oscillation enable input in loop mode.
- Capable of 1 volt/octave tracking over several octaves.
- Wide slew time range: 500 µs to 30 seconds per slope. Audio range switch setting constricts range to ease tuning.
- V/octave trim potentiometer accessible from the front panel.
- Highly multifunctional: slew limiter, envelope generator, envelope follower, (gated) VC(LF)O, frequency divider, slope detector and much more.
- Precision-milled 2 mm anodized aluminum front panel with high-resolution, non-erasable graphics.
- Bullet-proof design: polarised power header and MOSFET protection circuit.
- Includes 16-to-10-pin Eurorack power ribbon cable.
- Premium mounting hardware: black screws, black nylon washers and matching hex key.
- High-quality components and assembly; designed and made in Belgium.
Brainworx
Brainworx bx_limiter True Peak Introductory Sale
Brainworx bx_limiter True Peak Introductory Sale
bx_limiter TP (True Peak) from Brainworx is a completely new design, crafted to avoid the shortcomings of existing true peak limiters. Use it to confidently hit your loudness targets without leaving behind any distortion-inducing inter-sample peaks, and without compromising on the sound quality of your masters.
Designed from the ground up to be the ideal true peak limiter
Until now, most digital limiters that include a true peak mode have simply added it on as an afterthought. This has left a lot to be desired, with users complaining about unstable low end, compromised stereo imaging, harsh artefacts, and smeared transients. But with the bx_limiter TP, Brainworx has taken a new approach, designing the TP algorithm from scratch to make it perform and sound better than other digital limiters – while also eliminating troublesome inter-sample peaks for even cleaner results.
Use bx_limiter True Peak (Affiliate Link) to confidently hit your loudness targets without leaving behind any distortion-inducing inter-sample peaks, and without compromising on the sound quality of your masters.
Pricing and Availability
Buy bx_limiter True Peak (Affiliate Link)now for only £219.99 / $249.99.
Signum Audio
Signum Audio’s New BUTE Loudness Suite 2 – Smart, Convincing Loudness Metering and True Peak Brickwall Limiter for Post-Production
Smart, Convincing Loudness Metering and True Peak Brickwall Limiter for Post-Production
Signum Audio release today BUTE Loudness Suite 2 (BUTE-LS2) and BUTE Loudness Analyser 2 (BUTE-LA2), major updates to previous versions, making the mixing and mastering journey even smoother.
BUTE Loudness Suite 2 is a smart, integrated and responsive loudness metering and audio limiting plugin that delivers the tools studios, media, and broadcasting producers need to mix and master professional audio within loudness specifications.
Many producers are moving towards mixing and mastering within loudness specs set internally or by major streaming and broadcasting platforms for quality assurance. By providing metering and limiting functions in the same plugin with smart workflow features to maintain creative flow, BUTE helps optimize the quality of mixes and masters, while avoiding potential distortions downstream.
New in BUTE Loudness Suite 2
The Suite 2 will not overwrite your previous version of BUTE Loudness Suite, so you can have the two plugins running in parallel and not worry about previous projects.
- New integrated limiting functionality within the main user interface allowing configuration of auto-adaptive release, post-gain, and selection Transparent, Natural and Smooth curves presets (not in BUTE-LA2)
- New display settings within the main user interface, including new True Peak/LUFS Metering view, Relative/Absolute Scale, and Max/Live modes
- New Dynamic Range reading as requested by users
- Improved compatibility with a wide range of DAWs (VST / AU / AAX including AudioSuite)
- Auto-syncs to DAW on load-up so plugin engages on launch
- Improved window resizability in full and compact read-out view to optimize screen estate when using multiple programs
- The compact read-out view retains access to limiting controls
- Ability to switch tooltips on and off
- Simplified read-outs for added clarity
- Better responsiveness all-round
- Surround version – auto-detects channel configuration you are using and lets you select the configuration from the drop-down menu in main display to test inputs for up to 7.1.2 Atmos
- Industry-standard (IEC 60268-18) meter bar fallback behaviour or more natural feel
The Loudness Suite 2 includes Bute Limiter 2, Bute Normaliser, and Bute Analyser 2 with a bonus integrated TP Limiting feature. Smart, powerful loudness metering and True Peak Brickwall limiting toolkit for post-production.
Where can you use BUTE Loudness Suite 2
Mixing & Mastering
- Produce consistent masters
- Avoid ‘level shifting’ and clipping downstream
- Ensure accurate representation of your audio/music
- Measure and refine dynamic content
Post-production & Broadcasting
- Hit target levels easily with a wide range of implemented presets
- Ensure and prove compliance with regulation
- Balance dialogue, music and effects
- Manage live broadcasting & streaming levels accurately and efficiently
- Optimise dynamics for streaming content
Game Design
- Balance sound effects and dialogue
- ASWG 5.1 and 7.1 Surround Sound support (Surround Version)
Key Features of BUTE Loudness Suite 2
- Integrated True Peak limiter and loudness metering in one plugin
- Smart history overview for completely interactive browsing of up to 10-hours of loudness data at a glance
- The custom alert system flags up areas that need attention with severe (red) or warning (yellow) pointer on the historical overview. User settings can be defined in the settings panel.
- A smart auto re-metering feature that syncs to DAW on load-up, and auto-detects and reflects any adjustments you make in the DAW on the graphical display
- Powerful compact read-out view which is completely resizable vertically and horizontally to optimize screen space while keeping readings visible and limiting settings accessible
- An adaptive auto-release function can be tweaked by a scale factor using the release knob, enabling fine-tuning
- Ultra-transparent True Peak limiting algorithm means mastered audio stays faithful to the original mix
- 3 different release curves for Transparent, Natural, and Smooth limiting (BL2 includes an additional “Pumping” and “Linear” release curves for creative music production)
- Display Settings on the main user interface to switch between True Peak/Metering, Relative/Absolute Scale, or Max/Live modes
- A highly responsive and informative graphical interface
- Auto-detects DAW channel configuration with a dropdown menu to select mono, stereo or surround configurations (Surround Version)
- A wide array of built-in presets for the very latest loudness standards and recommendations
- Highest quality linear phase upsampling
- Industry-standard (IEC 60268-18) meter bar fallback for a natural, analog feel
- Clean and comprehensive read-outs for short-term & momentary loudness, True Peak, and traditional RMS
- Reloadable session data
- Save, Load and Export metering data
- Includes additional copies of BUTE Loudness Normaliser standalone application and BUTE Limiter 2 plugin
- Available in Stereo or Surround version. The Surround version expands support for multi-channel configurations up to Atmos 7.1.2
- Available for Windows 7 or higher and Mac OSx 10.9 Lion or higher
- Compatible with VST / VST3 / AU / AAX (including Audio Suite)
- Pro Tools 12.5 or higher for Audio Suite format
- Free future updates
BUTE-LS and BUTE-LA Existing Users
The update will be sent out free to all existing users of BUTE-LS and BUTE-LA. If you have purchased a BUTE plugin from us before, Signum Audio would be happy to offer a discount on the upgrade. Just get in touch with Signum Audio using the email you are registered with, at support@signumaudio.com.
Pricing and Availability
The new BUTE Loudness Suite 2 is available now.
Signum Audio
BUTE Loudness Normaliser is MAGIC for Audio Broadcast Standards
BUTE Loudness Normaliser
The Bute Loudness Normaliser is a high-end standalone application for Windows and Mac, assisting post-production engineers with the final checks of the mastering journey. With our automated solution, you can rest assured your audio is on point before submission in just a few clicks.
Signum Audio’s Bute Loudness Normaliser is absolutely magic. It’s 2step loudness normalization for a large assortment of loudness standards. Radio, TV, Netflix, Youtube, Spotify, iTunes, and many more, these plugins get your perfect results in a few clicks.
Note: This product is the Stereo version. The Surround Sound version of Bute Loudness Analyser is also available. In addition to the Stereo version, the Surround Sound version of Bute Loudness Analyser is also available, providing a more immersive experience for users working in a surround sound environment. For those interested in expanding their sound capabilities, we also offer an atmospheric pads soundset that can be seamlessly integrated with the Bute Loudness Analyser for a more dynamic and diverse sound experience.
15 Best Places to Score Affordable Furniture for Your Home
15 Best Trampolines for Kids and Adults Alike: Top Picks and Reviews
15 Best Garage Workbenches for Your Ultimate DIY Projects
15 Best Down Alternative Comforters to Keep You Cozy All Year Round
15 Best Kitchen Sink Materials for Your Dream Kitchen
15 Best Places to Get a Couch for Your Stylish Home Decor
-
Microphone6 days agoUnleash Your Inner Podcaster: Discover the Best Microphone for Crisp, Clear Audio
-
Composing6 days agoMUTILATED NOISE by SampleTraxx: The Next Generation Sound Collection
-
Audio Production4 days agoUnleashing Sound Therapy: Incorporating Acoustic Design in a Wellness Centre
-
Singing6 days agoWhat Is Breath Support And Why Is It Important For Singers?
-
Ambient4 days agoUnleashing Eerie Waves: A Guide on Producing Dark Ambient Music
-
Ambient3 days agoMastering the Art of Dark Ambient Synthesizer Music
-
SEO2 days agoHarmonizing Holistic SEO for Musicians: Crafting a Path to Digital Triumph
-
Ambient3 days agoUnleash Your Creativity: A Complete Guide to Innovating in Dark Ambient Music