Connect with us

Vult DSP

Vult Freak is Available for Pre-Order!

2025

Published

on

Vult Freak is Available for Pre Order

Vult Freak Filter

Vult Freak is Available for Pre-Order, this means Shipping will start at the beginning of October 2019. I did order mine already and look forward to the shipment in a few weeks. after the first batch of Vult Freak was sold out it has been a long month to start the pre-ordering for the second batch of Freak filters.

Vult Freak simulates more than 12 analog filters (and some digital). Every model was meticulously developed to capture the soul of the original circuit and make it efficient so it simulates in real-time inside this 12 HP device.

Vult Freak Filter Includes

  • Tangents – Steiner-Parker filter containing three different variations.
  • Lateralus – Ladder filter.
  • Nurage – Low pass gate / Borg filter.
  • Ferox – CMOS filter.
  • Vortex – Russian filter.
  • Unstabile – Circuit bent State Variable filter.
  • Stabile – State Variable filter.
  • Rescomb – Resonant Comb filter.
  • Vorg – MS-20 style filter.
Advertisement

Vult DSP

Wolv Waveshaper – A pack of Wolves Attacks

2025

Published

on

Wolv Waveshaper A pack of Wolves Attacks

Vult DSP New Wolv Waveshaper For Eurorack

Over the last years, Vult DSP built a lot of synthesizer circuits. On a few occasions, Leonardo (Vult DSP) make full eurorack modules. For example, some years ago Leonardo designed the PCBs and panel for a Steiner-Parker filter. Leonardo gave away the boards to some of my friends and he believes that there are 4 “copies” in existence.

Wolv wave shaper.
Wolv Waveshaper - A pack of Wolves Attacks 34

The last module Leonardo designed is the Wolv wave shaper.

Vult Wolv Sound Demo (Virtual Version)

This is a small demo of the Vult Wolv waveshaper. This virtual version matches the behavior of the hardware version.

Pricing and Availability

If you are interested on getting one of this you can pre-order Wolv Waveshaper here.  The estimated shipping is during July 2021.

Advertisement
Meet the all new Kndle Family scaled
Continue Reading

Expert Guides

#Jamuary2021 | Day 02 | Patch – The Card Game

2025

Published

on

maxresdefault 10

Patch – The Card Game

For this jam I used James Cigler’s ‘Patch – The Card Game’ (available at Signal Sounds here) to make some patching decisions, but it’s – mostly – a jam and the cards disrupted it :). But that’s part of the game! You can find the game on patchtcg.com. It started with ‘patch every cable you can’ (fortunately I made a selection of cables because I have a lot of them) and making a video also required to make some decisions myself.

At one point I had to patch all inputs of the Loquelic Iteritas Percido and it sounded terrible. So I had to cut it and start over. I wanted to ‘manipulate’ Clouds so I had to film until the dice rolled into a ‘6’ without falling out of my closet. So 99% is real, 1% is creative editing :).

Continue Reading

Vult DSP

Vult DSP – New Freak Firmware v2.5 Released

2025

Published

on

Vult DSP New Firmware v2.5 Released

Freak Firmware v2.5

You may already know because most of the new features were requested by the Vult DSP customers. Vult DSP implemented almost all the requests; in one shape or other. The ones that didn’t implemented, are safely stored in the Vult DSP backlog and will work on them for a future release.

This release has a lot of UI improvements. Probably the most important is that now you can select filters backward! If you keep the filter button pressed for about 1 second it will go to the previous model.

Vult DSP New Firmware v2.5 Released
Vult DSP - New Freak Firmware v2.5 Released 54

A silent improvement that you may not notice is that now the filters change without producing audible clicks or pops. This was a bit tricky to get right.

More settings

In the previous release, Vult DSP introduced the possibility of using “integrated VCAs” to control the filter output. In this release there are a few extra things that you can configure in your module:

  • Output signal range: lower the volume of the sound
  • Modulations voltage range: accept either 5 or 10 V
  • Stereo modulation: cutoff input inversely modulates the the filters
  • Output mix: mix the L and R channels

New models

The first new model is Phonok: vowel resonator. Phonok consists of a pair of LP and BP filters tuned to the two main formant frequencies. This resonator changes the tone of the input signal and makes it sound like the corresponding vowel. Phonok can be use to add some nice harmonics to the sound or to make your filter scream in pain “ai-ai-ai”.

Advertisement
Meet the all new Kndle Family scaled

Nurage gets some love in this release. Vult DSP has been obsessively experimenting with vactrols in order to improve my models. My new vactrol model is nicer more nonlinear. Since simulated vactrols can be modified at will, the Nurage filter includes now three types. Basically, each model changes in a way that makes it feel like it has a longer “decay”.

The last addition is Nurage-VCA. Low Pass Gates usually have a mode that, for lack of a better name, it is called “both”: a low pass filter and a VCA. Because this mode changes the gain, it also affects the resonance. In this case I have replaced the resonance control for a single parameter that morphs between the different vactrol models. The result is a kind of “decay” control, but with a nice and natural envelope.

Current Filters included:

  • Tangents: Steiner-Parker filter (three variations, LP, HP, BP).
  • Lateralus: Ladder filter (6, 12, 8 and 24dB options)
  • Nurage: Low pass gate/Borg filter 
  • Nurage-VCA: VCA+LPG variable vactrol
  • Ferox: CMOS filter (LP, HP, BP, Notch)
  • Vortex: Russian filter (LP, BP)
  • Stabile: State-Variable filter (LP, HP, BP)
  • Unstabile Circuit bent State-Variable filter (LP, HP, BP)
  • Vorg: MS-20 style filter (LP, HP)
  • Rescomb: Resonant Comb filter (Comb+ and Comb-)
  • Boomstick: Sallen-Key filter (LP,HP)
  • Disjoint: DJ-Style filter (48db, 96dB)
  • Debriatus: Wave Destructor (Bit Crush, Wave Fold, Distortion)
  • Nopskate: Flip-flop octaver
  • Flame: Analog distortion (Rodent, Cylinder)
  • Phonok: Vowel resonator

Stability

This new firmware also has a lot of small optimizations that should make the module more stable. If you ever experienced your module freezing, I apologize for that. Hopefully, all future releases will be rock-solid now that I have detected the root of the issue.

Pricing and Availability

Advertisement
Meet the all new Kndle Family scaled

You can get the new firmware following the links in the main Freak page. The filter is available fully assembled or as DIY kit.

FreakFirmware 2.5 by VULT DSP
Vult DSP - New Freak Firmware v2.5 Released 55
Continue Reading
Advertisement

Affiliate disclaimer

As an affiliate, we may earn a commission from qualifying purchases. We get commissions for purchases made through links on this website from Amazon and other third parties.

Advertisement

Vetted

About us

Established in 2007 and headquartered near Munich, Germany, StrongMocha News Group is a leading online publication providing in-depth content across diverse interests. Our mission is to inform, educate, and inspire readers through high-quality, detailed articles and reviews. With over 150 brands and magazines under our umbrella, we are committed to serving niche communities with specialized content tailored to their unique passions and needs.

Trending

Copyright © 2024 StrongMocha Affiliate disclaimer As an affiliate, we may earn a commission from qualifying purchases. We get commissions for purchases made through links on this website from Amazon and other third parties.